Custom Titanium Grade 5 CNC Turned Parts With Brushed Finish And Engraving
Why Buyers Choose A Titanium Specialist
Titanium is not forgiving. Wrong speeds burn the edge, soft setups let the bar deflect, and careless threading ends in galling. Most shops quote it high or turn it down. That is exactly why this part belongs with a factory that machines titanium every week.
·Hard material, handled right. Sharp tooling, rigid fixturing and controlled chip flow keep surfaces clean and dimensions stable.
·No galling on threads or bores. Lubrication strategy and tool path are managed so mating parts slide, not seize.
·Brushed finish done properly. Uniform grain, no heat tint, no tool chatter marks.
·Laser engraving in‑house. Logos, serials, date codes and data matrix marks stay permanent, high contrast and legible.
·Material traceability. Grade 5 bar stock with certificates, so your part history is never a guess.
Part At A Glance
Material
titanium Grade 5 (Ti‑6Al‑4V / UNS R56400) bar stock
Process chain
CNC turning, milling, secondary turning, laser engraving
Body
rounded rectangular section with full window cutout
Holes
countersunk side pin holes plus rear pinhole, positioned to print
Nose
hollow tapered section with precision center bore
Finish & Marking
fine brushed / satin, uniform directional grain; laser engraved logos, serial numbers or codes on request
Illustrated sample: roughly 102 mm long, asymmetric profile; your geometry can differ completely. If you can draw it, we can turn it, mill it, finish it and mark it under one roof.
Titanium Grade 5 Material Profile
| Property | Typical Value | Why It Matters To Buyers |
|---|---|---|
| Density | About 4.5 g/cm³ | Roughly 44% lighter than stainless steel at equal volume |
| Tensile strength | About 920‑1000 MPa | Strong enough for structural and load‑bearing roles |
| Corrosion resistance | Excellent, including seawater | Long life in marine, chemical and outdoor service |
| Strength retention | Holds up at elevated temperature | Suits heat‑exposed components |
| Biocompatibility | Well established for grade 5 | Relevant for medical and wearable applications |
| Machinability | Demanding, needs experience | Wrong setups cause burn, deflection and galling |
| Finish options | Brushed, satin, bead blast, laser engraving | Visual and marking requirements covered in‑house |
CNC Capability Table
| Operation | What We Deliver |
|---|---|
| CNC turning | Round bodies, steps, tapers, bores and threads from titanium bar |
| CNC milling | Window cutouts, pockets, flats, slots, pinholes and contoured profiles |
| Secondary turning | Nose forms, internal bores and finish diameters after milling |
| Laser engraving | Logos, serial numbers, date codes, data matrix and QR marks |
| Tolerances | Standard plus/minus 0.05 mm; critical features reviewed to tighter values per print |
| Finishes | As‑machined, fine brushed, satin, bead blasted, deburred edges |
| Files accepted | PDF, STEP, IGS, DWG; samples and sketches also welcome |
Typical Applications
Quality You Can Verify, Not Just Trust
Shenzhen Perfect Precision Products Co., Ltd. runs a 20‑year‑old factory with 6,000 square meters of floor space, 100+ CNC machines and a full ERP system.
- Four‑stage control: incoming material checks, first‑piece inspection, batch sampling and 100% pre‑shipment QC.
- Digital proof: 3D inspection equipment, mill certificates, material certificates and inspection reports on request.
- Traceability: every titanium batch runs through the ERP, so lots are easy to follow and repeat.
- After‑sales: report any issue by call, video conference or email within one month; our team responds with a solution within one week.
Samples And Lead Times
- ·Sample: 1‑2 weeks
- ·Production: 3‑4 weeks after approval
- ·Quote: send PDF, STEP, IGS or DWG, or simply photos and size notes of the part you need
About Us
Processing Material
Application
POSITIVE FEEDBACK
FAQ
1. Are you a manufacturer or a trading company?
We are a factory located in Shenzhen, China, with 20 years of rich experience, covering 6000 square meters. Complete facilities, including 3D quality inspection equipment, ERP system and 40 machines. If necessary, we can provide you with material certificates, sample quality inspection and other reports.
2. How to get a quote?
Detailed drawings (PDF/STEP/IGS/DWG...), including quality, delivery date, materials, quantity, surface treatment and other information.
3. Can I get a quotation without drawings? Can your engineering team draw for my creativity?
Of course, we are also glad to receive your samples, pictures or detailed size drafts for accurate quotation.
4. Can you provide samples before mass production?
Of course, the sample fee is necessary. If possible, it will be returned during mass production.
5. What is the delivery date?
Generally, the sample lasts for 1‑2 weeks and the batch production lasts for 3‑4 weeks.
6. How do you control quality?
(1) Material Inspection - Check material surfaces and approximate dimensions.
(2) First inspection of production - ensure critical dimensions in mass production.
(3) Sampling inspection - check the quality before delivery to the warehouse.
(4) Preshipment inspection - 100% inspection by QC assistant before shipment.
7. After‑sales service team
If you have any problems after receiving the product, you can provide feedback through voice call, video conference, email, etc. within one month. Our team will provide you with solutions within a week.
